| Products | Operating principle |
| GAS SENSORS |
| Select by application >>Domestic safety | Typical applications>> |
| Model | Photo | Target gas | Typical detection range | Ps | Description |
|---|---|---|---|---|---|
| TGS2442 |  |
Carbon monoxide | 30 - 1,000ppm | 14mW | Compact size Low sensitivity to alcohol vapor For residential CO detectors |
| TGS2610-D00 |  |
LP gas | 500 - 10,000ppm | 280mW | High selectivity to LP gas Good durability For residential gas alarms |
| TGS2610-C00 | |
LP gas | 500 - 10,000ppm | 280mW | Quick gas response For leak checkers |
| TGS2611-E00 |  |
Methane | 500 - 10,000ppm | 280mW | High selectivity to methane gas Good durability For residential gas alarms |
| TGS2611-C00 |  |
Methane | 500 - 10,000ppm | 280mW | Quick gas response For leak checkers |
| TGS2612 |  |
Methane ,LP gas |
500 - 10,000ppm | 280mW | Stable relative sensitivty between CH4 & LP gas Good durability For residential gas alarms |
| TGS3870 |  |
Methane & CO | 500 - 12,500ppm 50 - 1,000ppm |
38mW | Dual gas detection with one sensor For residential gas detectors |
| TGS5042 |  |
Carbon monoxide | 0 - 1,000ppm | No power required | Electrochemical type Battery operable Long life |
| TGS6810 |  |
LP gas ,Methane |
0 - 100%LEL | 525mW | Catalytic type Wide detection range Linear output For residential gas alarms |
| LPM2610 |  |
LP gas | 500 - 10,000ppm | 280mW | Precalibrated module with TGS2610 and temperature compensation circuit For residential gas detectors |
| NGM2611 |  |
Methane | 500 - 10,000ppm | 280mW | Precalibrated module with TGS2611 and temperature compensation circuit For residential gas detectors |
| For inquiries other than those listed above, please contact from here. | Ps: Power consumption |
| Domestic safety | Air quality control | Automotive |
| Appliance control | Industrial safety | Personal safety & health |
|
<< Back to "Products"
|